For Nokia original cable CA-116, CA-113CU and CA-134.

For Nokia original cable CA-116, CA-113CU and CA-134.
Holder for cable plug attachment. To be used with Nokia original cable CA-116 (included in CK-7W), CA-113CU (included in CK-300), or CA-134 (included in CK-100 and CK-600). The cable is easy to attach to the holder. The cable connects to the phone automatically when you put your Nokia in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Place your device in the holder. Press the connector into place in the holder. Keep pressing carefully while rotating the connector so it connects properly. When the connector attaches properly to the device it is in the correct position.

2. Hold the device and the cable in that position and tighten the screw so the connector is locked into place. The cable is in place.

3. Installation of holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.

4. The holder is in place.